| Customization: | Available |
|---|---|
| After-sales Service: | Reusable |
| Warranty: | Reuse |
|
Still deciding? Get samples of US$ 20/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1: The combined ribbed plastic formwork has a smooth surface, does not stick to concrete, and is easy to demould without applying a release agent. |
| 2: The combined ribbed plastic formwork is light in weight, has good corrosion resistance, is recyclable, is conducive to environmental protection, and meets national energy conservation and environmental protection requirements. |
| 3: The formwork can be turned over up to 120 times during the construction project, reducing the cost of using the formwork. |
| 4: The structure is simple and easy to install. The length of the construction site can be cut at will. It can be flexibly combined with wood formwork/aluminum formwork combined construction to adapt to the diversification of structures. |
| 5: Fire protection (fire protection grade reaches B2), anti-rust, anti-corrosion, acid and alkali resistance , safe and reliable |
| 6: The combined ribbed plastic formwork is not afraid of sun, rain and blisters, and is specially used for open-air and water-related construction. |
| 7: Templates can be renovated after use and damaged, and old products can be recycled. |
| 8: Green and environmentally friendly, 100% recyclable. |
| Steel support formwork accessories | ||||||||
| Length/ m | Wall thickness/mm | diameter | length | Unit weight/kg | 20 feet cabinet/item | Top/chassis/mm | ||
| Inner tube/(mm) | Outer tube/(mm) | Inner tube(m) | Outer tube(m) | |||||
| 1.6-2.9 | 2 | 48 | 60 | 1.6 | 1.4 | 9.5 | 1900 | 120*120*5 |
| 2.0-3.0 | 2 | 48 | 60 | 2 | 12 | 9.6 | 1600 | 120*120*5 |
| 2.0-3.5 | 2 | 48 | 60 | 2 | 1.7 | 11.5 | 1600 | 120*120*5 |
| 2.4-3.9 | 2 | 48 | 60 | 2 | 2.2 | 12.7 | 1250 | 120*120*5 |
| 2.4-3.9 | 2.75 | 48 | 60 | 2.4 | 1.7 | 15.7 | 1250 | 120*120*5 |
| 2.6-4.1 | 3 | 48 | 60 | 2.6 | 1.6 | 17.5 | 1200 | 120*120*5 |
| Note: The weight of a single piece is obtained based on random inspection, and the specifications can be customized according to customer requirements; | ||||||||
| Ringlock scaffolding | |||||
| Name | Specifications(m) | Approximate weight(kg) | Name | Specifications(m) | Approximate weight(kg) |
| Pole diameter 48mm Wall thickness 3.0mm |
2.55 meters, three flowerpots. | 9.9 | Diameter of the horizontal bar48mm Wall thickness2.75mm |
1.22 | 4.1 |
| 1.95 meters, two flowerpots | 7.6 | 0.87 | 2.9 | ||
| 1.65 meters a flower pot | 6.4 | 0.47 | 1.6 | ||
| 1.35 meters per flower pot | 5.2 | 1.2 | 4 | ||
| 1.05 meters per flower pot | 4.2 | 0.9 | 3 | ||
| 0.75 meters per flower pot | 3.2 | 0.6 | 2.2 | ||
| Note: The weight of a single item is based on an estimated weight from random checks, and the specifications can be customized according to customer requirements. | |||||
| Template accessories system | |||
| name: | Reentrant angle | name: | Multi-functional corner |
| Specification: | 300mm*300mm | Specification: | 300M*100-150mm Adjustable |
| Craft: | Cold bending forming | Craft: | Cold bending forming |
| Weight: | 3kg | Weight: | 3.15kg |
| name: | Beam joint | name: | Exterior angle joint |
| Specification: | 1200mm/900mm | Specification: | 300*60*70mm |
| Craft: | Cold bending forming | Craft: | Cold bending forming |
| Weight: | 5.17kg,3.88kg | Weight: | 1.64kg |
| name: | Beam pin | name: | Wall nail strip mother |
| Specification: | 100*20*50mm | Specification: | Ф14mm |
| Craft: | Casting | Craft: | Thread rolling |
| Weight: | 0.31kg | Weight: | 1.2kg/m |
| Template accessories system | |||
| name: | disc nut | name: | Cross washer |
| Specification: | Ф14mm | Specification: | Ф14mm |
| Craft: | Casting | Craft: | Stamping |
| Weight: | 0.435kg | Weight: | 0.26kg |
| name: | Hook with mother | name: | Adjustable buckle hanging net component |
| Specification: | Ф14mm | Specification: | |
| Craft: | Roll threading | Craft: | Stamping |
| Weight: | 0.4kg | Weight: | 0.8kg |
| name: | Early removal of the head | name: | Vertical beam chuck |
| Specification: | length600mm | Specification: | |
| Craft: | Thread rolling, casting | Craft: | Stamping |
| Weight: | 3.96kg | Weight: | 0.02kg |
){kind=link}